How to upgrade D-Link switch to latest boot code and firmware?
Note: Before you begin this upgrade you will need a computer running a TFTP server. If the new firmware version requires a different bootcode, continue to Step 1. If you do not need to upgrade the...
View ArticleClik here to view.
How to create 2 separate Vlans on D-Link switch?
Step 1: Connect COM port of the computer to the console port of the switch with a RS-232 serial cable. Step 2: Open hyperterminal on the computer and configure as followed: Bits per second: 9600 Data...
View ArticleWhat is a Combo Port on an Ethernet Switch?
A Gigabit Ethernet Combo port is an Ethernet port and a Mini-GBIC port (also called SFP´s) that share the same switch fabric and port number. A Combo port is a way to provide different types of...
View ArticleClik here to view.
D-Link Switch Advanced Configuration Guide(IGMP,GVRP,Telnet etc.)
This article teach you how to switch D-Link Advanced Settings. Step 1 Open a web browser and type the IP address of the switch in the address bar (default is 10.90.90.90). Press Enter. Step 2 Both the...
View ArticleClik here to view.
D-Link DGS-1016D 16-Port Gigabit Desktop/Rackmountable Switch Features
The DGS-1016D/1024D switches were designed for easy installation and high performance in an environment where traffic on the network and the number of users increase continuously. • D-Link Green...
View ArticleClik here to view.
How to Install D-Link DGS-1016D Gigabit Desktop/Rackmountable Switch
This section will explain how to connect Ethernet devices to your new D-Link switch and how to mount the switch. Before You Connect to the Network The site where you install the switch may greatly...
View ArticleClik here to view.
D-Link GO-SW-16GE Desktop or Rackmount Switch Quick Install Guide
Installing Power Cord Clip To prevent accidental removal of the AC power cord, it is recommended to install the power cord clip together with the power cord. 1. With the rough side facing down, insert...
View ArticleClik here to view.
How do I enable the loopback Detection for D-Link DGS-1500 switch?
What is loopback Detection The Loopback Detection function is used to detect the loop created by a specific port while Spanning Tree Protocol (STP) is not enabled in the network, especially when the...
View ArticleClik here to view.
How do I configure IP-DSCP and IP Precision Mapping on the D-Link DES-3226L...
Step 1 Open a web browser, such as Internet Explorer or Netscape, and enter the IP address of the switch (Ex:192.168.20.223). Press Enter. Step 2 Click on the plus sign (+) next to QOS, then click on...
View ArticleClik here to view.
How to configure Class of Service (CoS) on the D-Link DES-3226L switch?
Class of Service (CoS) is a way of managing traffic in a network by grouping similar types of traffic for example: streaming video,voice,etc… and treating each type as a class with its own level of...
View Article
